This example shows how to configure VTP, VLANs, and assign switch ports to those VLANs:

Console> (enable) set vlan 10
Vlan 100 configuration successful
Console> (enable) set vlan 20
Vlan 100 configuration successful
Console> (enable) set vlan 40

#router igrp

#network 10.128.0.0

#network 10.224.0.0

#network 10.240.0.0

#network 10.192.0.0

#ipx routing

#interface Vlan 10

#ipx network 552387 encapsulation sap

#ipx maximum paths 10

#interface Vlan 10

#ipx network 552388 encryption sap

# ipx maximum paths 10

#access-list 800 deny any Vlan 40

#access-list 800 deny any Vlan 20

#access-list 1 permit 10.192.0.0. 0.0.255.255 Vlan 40

#deny any

#access-list 2 permit 10.224.0.0. 0.0.255.255 Vlan20

#deny any

#access-list 101 permit tcp 10.240.0.0 0.0.255.255 10.128.0.0 0.0.255.255

#access-list 101 deny any

#access-list 102 permit any

#interface vlan 10

#ip access-group 101 in

#ip access-group 102 out

#access-list 103 permit tcp 10.240.0.0 0.0.255.255 10.192.0.0 0.0.255.255

#access-list 103 deny any

#access-list 104 permit 10.224.0.0 0.0.255.255 10.192.0.0 0.0.255.255

# access-list 104 permit 10.248.0.0 0.0.255.255 10.192.0.0 0.0.255.255

#access-list 104 deny any

#interface vlan 20

#ip access-group 103 in

#ip access-group 104 out

#access-list 105 deny any

#access-list 106 permit any

#interface vlan 30

#ip access-group 105 in

#ip access-group 106 out

#access-list 107 permit 10.192.0.0 0.0.255.255 10.224.0.0 0.0.255.255

#access-list 107 permit 10.240.0.0 0.0.255.255 10.224.0.0 0.0.255.255

#access-list 107 deny any

#access-list permit 10.224.0.0 0.0.255.255 10.224.0.0 0.0.255.255

#access-list deny any

#interface vlan 40

#ip access-group 107 in

#ip access-group 108 out